Mitsubishi Triton dashcam hardwire fuse guide (Australia)
Mitsubishi Triton (facelift, 2020-2023 table). RHD trucks have the cabin box behind the glovebox. We have accessory-socket and room-lamp fuse names to test, nothing confirmed.
Core fields known: 3/4 (✓ Box location · ✗ Fuse type · ✓ Switched (ACC) slot · ✓ Constant slot). Known doesn't mean verified. See the evidence badges below.
Fuse box location and type
Location: Right-hand-drive vehicles: behind the glovebox. [1] Reference table
Fuse type: Unknown, help us verify
Unknown, help us verify.
Scope of this data: Table is for the L200/Triton facelift, 2020-2023. The AU MR Triton (from 2018) may carry an earlier layout. The 2024+ Triton is a different vehicle and is not covered.
Constant (always-on) fuse candidates
Battery-direct slots: 12V with the ignition off. Use for the camera’s parking-mode (BATT) wire. Candidates only. Meter each one.
| Slot | Rating | Label | Evidence | Notes |
|---|---|---|---|---|
| #13 Room lamp | 15A | Room lamp | Label name only | Dome/room-lamp feeds are commonly battery-fed. Not confirmed. [1] |
Ignition / ACC (switched) fuse candidates
Slots that read 0V with the ignition off and ~12V when it’s on. Candidates only. Meter each one.
| Slot | Rating | Label | Evidence | Notes |
|---|---|---|---|---|
| #2 Cigarette lighter / Accessory socket | 15A | Cigarette lighter/Accessory socket | Label name only | Label suggests switched. Not confirmed. [1] |
| #6 Accessory socket | 15A | Accessory socket | Label name only | Label suggests switched. Not confirmed. [1] |
Slots to avoid
- Central door lock (#12), and anything engine, airbag/SRS or brake related.
Gotchas for this vehicle
How to verify before you tap (generic)
- Find the fuse box and its cover diagram. Use a multimeter or test light, with the black lead on bare chassis metal.
- Test both contacts on the top of each candidate fuse. Constant: 12V+ with the ignition off. Switched (ACC): 0V with the ignition off, 12V+ with the ignition on. Check again after the car has been locked a few minutes: some circuits stay live briefly.
- Don't put the ACC and constant wires in the same fuse slot. Use a fuse in the tap that suits the camera (typically 3–5A), and keep the tap the right way round so the fuse is fed from the supply side.
- Earth the black wire to a clean bare chassis bolt. Cable-tie the tap and wiring so nothing rattles loose.
- Check the dashcam on and off, and after the car sleeps. Look for warning lights, and for the vehicle waking or draining.
Generic method per the BlackVue hardwire kit manual and the BlackboxMyCar guide. Not specific to this vehicle.
Sources
- Autogenius - Mitsubishi L200 (2020-2023) fuse box diagram page reference
https://www.autogenius.info/mitsubishi-l200-2020-2023-fuse-box-diagram/
Used for: Cabin box location and fuse names.
Why this confidence rating? Fuse names only from a global L200/Triton table. No power-state confirmation, no owner threads readable. Model-year mapping to the AU MR Triton is our assumption.
Unverified leads. Don't rely on these.
- A search summary suggested fuses 12 or 13 for constant. Only the labels were verified from the table. The thread behind that suggestion was unreadable.
Fitted one of these? Help us verify it.
Tell us the slots you metered and what you found. It improves this page for everyone.
Submit a fuse map for this vehicleGet new fuse maps in your inbox
New vehicles and verified fuse slots, plus the odd install gotcha. No spam.
Signing up opens an email to us from your email app. We’ll add you to the list.